Description:

Physical Properties:

Durabak™ floor coating and industrial coating is a tough, one-part polyurethane with self-contained recycled rubber granules, which give it an attractive tough-textured appearance. When exposed to atmospheric moisture, Durabak™ undergoes a chemical curing process which changes it from a liquid to a tough polyurethane membrane. Durabak™ will chemically bond to most clean and dry surfaces. These include, but are not limited to, concrete, wood, fiberglass, metal, rubber and soundcoatinged materials. It can be applied by roller, brush or spray. Durabak™ can give a relatively smooth or rough surface, depending on application technique. Uses: Durabak™ has many applications for commercial, military and civilian use. Durabak™ protects surfaces from foul weather elements and harsh chemicals, while creating a non-slip surface on: pedestrian walkways truck beds ramps and loading docks bridges concrete, metal and wooden steps catwalks ship decks marine applications pleasure boats storage tanks floors handicap ramps pools and spas sealing rusty pipes playgrounds freight elevators tool handles roofing vehicle undercoating curb ramps parking lots

Weight per gallon, pounds 10 Viscosity, Kreb units  67-72 Percent solids by weight R Application temperature range 32oF-95F Application thickness, 2 coats dry 29-39mils Flexibility total flexibility Resilience resilient in dry state Abrasion resistance     Tabor wheel, 1000 gr load, 1000 cycles 30.5 Fire resistance     Flame spread     Smoke generation ASTM E-162: 01 ASTM E-662: 06 Salt water resistance 100% Freeze-thaw resistance -60oF to +254oF Pot life 3 Hours Shelf life min. 1 year Flash time 1-1/2 to 3 hours Walk time 6 to 12 hours Time between coats + 1 hour Full circle + 4 days VOC 2.9 lbs/gal DOT Hazmat Info coating, 3 UN1263, PG III

Advantages: One-Part No mixing of components Totally Flexible Never chips, flakes or peels Repairable Bonds to itself Protection Waterproof, Resistant to acid, chemicals, UV exposure, salt water Fast Drying Very short intercoat time; Foot traffic in 6 to 12 hours Economical Lasts for years; no need to remove old Durabak™ when recoating